|
Post by [S.O.A.R] William on Jul 19, 2006 19:23:30 GMT 7
Sir,
Kasi diba babalak kung saling battery a 9.6v? Ask ku mu about ketang NiCD battery... Diba need ya pang i-discharge ita before ke i-charge ulit? Unlike the NiMH, pede neng i-charge right-on.
Kasu sir, what if ala ku pang discharger, atin bang alternative way pra i-discharge ke? I've checked ACM games tas ikit ke itang "light bulb" discharger. Effective ya ba talaga ita? Atin ng mekapag try kekayo? If ala pa, nanu la reng alternative discharger yu? Salamatz.
|
|
SNIPERACE
Global Moderator
Violence is the first refuge of the incompetent.
Posts: 1,209
|
Post by SNIPERACE on Jul 19, 2006 19:50:43 GMT 7
pwede basta yun discharger mo should not exceed the number of cells you have. example kung 9.6v w/ 8 cells dapat yun bulb mo should be 8 volts total. a discharger kasi should be able to discharge an equivalent voltage only. pag sumobra masisira din NiCd battery mo.
|
|
|
Post by [S.O.A.R] William on Jul 19, 2006 19:57:34 GMT 7
I see. Thanks sir! Pag nakabili na ako ng Ni-CD battery, construct ko na yung lightbulb discharger. ;D
Sir, yung 9.6 sanyo na 2400 mah, maliit na battery rin ba sila? Tulad ng sa stock na R6? O malaki sila? If malaki sila, eh di di ko na sila malalagay dun sa hand-grip??? Tas since di ako full-stock user sa R6, eh di electric tape ko na lang sila sa hand guard? Parang uncomfortable ah...
|
|
rambo
Corps Commander
Posts: 674
|
Post by rambo on Jul 19, 2006 20:28:44 GMT 7
hehe ako gamit ko 10 pcs 12 volts na car valve connected in series or parallel ata just the way dun acm boards. lakas mag dis-charge. mas matindi yung kay sir jeff lalaking valve na ginamit LOL! yung iba fan naman ginagamit. imo or experience so far ok pa naman yung mga nicads ko kahit di equal yung voltage ng mga valve vs the batts kasi importante lang tlga yung mahigop yung remaining power dahil baka magkaroon ng memory effect. kakasawa din kung minsan pag nagmamadali ka kaya baka kuha na rin ako ng nimh batts or lipoly. kaso the best sa power output and mga nicads lalu na kung maratrat.
|
|
rambo
Corps Commander
Posts: 674
|
Post by rambo on Jul 19, 2006 20:31:38 GMT 7
maganda pag nagdidischarge ka wag mong hayaan uminit masyado. pag ganon diskonek mo muna at hayaan lumamig tapos discharge uli or tutukan meng electric fan. mas tatagal life ng batts pag ganon kasi kalaban nyan yung sobrang pag-init.
|
|
|
Post by [S.O.A.R] William on Jul 19, 2006 20:32:03 GMT 7
Sir, how about the size of the nicad batteries? Large ba sila? O yung punggok?
|
|
rambo
Corps Commander
Posts: 674
|
Post by rambo on Jul 19, 2006 20:40:14 GMT 7
basta yung large. gaya nong pics ng gp batts binebenta ni sir mark adik.
|
|
|
Post by [S.O.A.R] EngrManzi on Jul 19, 2006 21:10:27 GMT 7
Pag bumili ka naman ng Nicad make sure you have the right charger for it. I don't think kakayanin ng stock acm charger mo yun
|
|
SNIPERACE
Global Moderator
Violence is the first refuge of the incompetent.
Posts: 1,209
|
Post by SNIPERACE on Jul 19, 2006 22:48:49 GMT 7
thats right and remember to discharge it just enough not to empty it. kasi pag todo ubos mas mabilis daw masira.
regarding discharging, pag sobra bilis din masama daw sa NiCd batt. i used to do that till someone advised me. so, sinunod ko na lang sya para sure. hehe
|
|
rambo
Corps Commander
Posts: 674
|
Post by rambo on Jul 19, 2006 23:06:32 GMT 7
hahhaha! daming tip tlga sa battery.
basta wag pabayaan uminit ng sobra sa discharge or re-charge tatagal yan.
gamit ko sa nicad ko wallcharger lang kaso tagal almost 14-18 hours. lately di na maganda output yung wall charger ko 30 hours na di pa mainit yung batts. hhehe ginamitan ko ng 12volt 7amp na car battery charger ayun 1 hour lang fully charge na kayang iputok 6-7 ak mags hehe. of course di maganda yung laging fast charging dapat may slow charging din kaya ok din mga wall chargers. pero kung may pera the best sympre mga tlp.
|
|
|
Post by [S.O.A.R] William on Jul 19, 2006 23:29:41 GMT 7
Hehheh! Sorry now lang reply... Nakatulog ako... Anyways gising na ako, gud am sa lahat! Wahah!
@ Topic :
Sir, ano ma s-suggest niyong charger pra sa nicad and how much will it cost me? As much as possible sana yung affordable. Eheheh! Sayang di ko na magagamit stock chargers ko...
|
|
|
Post by [S.O.A.R] EngrManzi on Jul 20, 2006 6:00:47 GMT 7
Yung binebenta na Charger ni SIr Mark pwede na yun at least it comes with a discharger
|
|
|
Post by [S.O.A.R] William on Jul 20, 2006 10:06:03 GMT 7
Woah!! Di na ata abot sa budget ko. Ehehehe!!! Wala na bang mas mura dun? Kahit wala ng discharger feature. Mag lightbulb na lang muna ako. Eheheh!
|
|
rambo
Corps Commander
Posts: 674
|
Post by rambo on Jul 25, 2006 19:13:20 GMT 7
mga murang charger yung slow chargers. may nakita ako sa fas 700 lang. kaso 6 hours charging time or more dipende sa mah ng batts.
heto pa magandang gawin discharger... ginawa ko kanina gumawa ako ng connectors para sa old cassette player ko na may dc 15 volt input. ayun habang discharge ko yung 9.6 volts na 3300 mah hehe may sounds ako. mabagal ang discharge nya unless itodo ko volume ng palyer hehe kaya mas safe to may sounds pa ko hehehe. ayos to pag alang power sa bahay.
|
|
SNIPERACE
Global Moderator
Violence is the first refuge of the incompetent.
Posts: 1,209
|
Post by SNIPERACE on Jul 25, 2006 21:39:58 GMT 7
hehe adik talaga
|
|